Showing all 6 results

  • Flow-Meter 10-100 / 3.8″

    The new BRITA FlowMeter add-on module ensures more clarity and operator convenience with BRITA filter cartridges. Once the relevant filter capacity has been programmed, the BRITA FlowMeter calculates the current residual capacity of your filter cartridge by recording the water flow water flow volume and displays it where it can be read easily. The FlowMeter is the ideal add-on module for the BRITA filter cartridge systems.

    Memory call-up of the last 5 filter cartridges with usage period and flow quantity Warning display and battery exhaustion Memory remains intact even after battery change

  • Flow-Meter 10-100 / 3.8″ NEW

    The new BRITA FlowMeter add-on module ensures more clarity and operator convenience with BRITA filter cartridges.

    Once the relevant filter capacity has been programmed, the BRITA FlowMeter calculates the current residual capacity of your filter cartridge by recording the water flow water flow volume and displays it where it can be read easily.

    The FlowMeter is the ideal add-on module for the BRITA filter cartridge systems.

    Memory call-up of the last 5 filter cartridges with usage period and flow quantity Warning display and battery exhaustion Memory remains intact even after battery change

  • Purity Clean 1200 ST Cartridge

    • Effective for raw water and high carbonate hardness and harmless additional mineral content

    • Glasses, white crockery and cutlery look clean and unmarked – without any hand polishing

    For feed water with high carbonate hardness and harmless additional mineral content.

    The PURITY 1200 Clean removes the ions that cause limescale and particles from the feed water in a targeted way.

    The result is partially demineralised water for ideal washing results.

    PURITY Clean 1200

    Label concept: BLUE

    Technology Partial demineralisation
    Capacity  with a carbonate hardness of 10°dH (bypass setting 0%) : 12,000 l
    Max. operating pressure: 6 bar
    Water intake temperature: 4–60°C
    Flow rate with 1 bar pressure loss: 850 l/h
    Nominal flow 300 l/h
    Pressure loss at nominal flow 0.45 bar

     

    BRITA filter PURITY Clean Extra filtration

    Trusted BRITA System Filter Technology demineralises water step by step:

    1 Pre-filtration 
    A fleece retains coarse particles. Further, its water distribution system ensures optimum use of the downstream filter medium.

    2 Carbonate hardness reduction
    Filter medium reduces carbonate hardness to prevent limescale formation.

    3 Permanent hardness reduction (PURITY Clean Extra only)
    This stage eliminates permanent hardness and non-hardness causing minerals.

    4 Anion reduction (PURITY Clean Extra only)
    This filter medium reduces remaining ions.

    5 Fine filtration
    Finally, a fleece retains remaining fine particles.

    IntelliBypass technology
    The unique IntelliBypass technology allows for a constant by-pass water rate irrespective of the volumetric flow. This ensures consistently high water quality, particularly in case of low water throughput rates.

     

    2019 Capacity table

     

     

  • Purity Clean 1200 ST Without MDU

    Every PURITY filter system consists of 3 single components: Filter head, Pressure vessel, Exchange cartridge

     

    • Effective for raw water and high carbonate hardness and harmless additional mineral content

    • Glasses, white crockery and cutlery look clean and unmarked – without any hand polishing

    For feed water with high carbonate hardness and harmless additional mineral content.

    The PURITY 1200 Clean removes the ions that cause limescale and particles from the feed water in a targeted way.

    The result is partially demineralised water for ideal washing results.

    PURITY Clean 1200

    Label concept: BLUE

    Technology Partial demineralisation
    Capacity  with a carbonate hardness of 10°dH (bypass setting 0%) : 12,000 l
    Max. operating pressure: 6 bar
    Water intake temperature: 4–60°C
    Flow rate with 1 bar pressure loss: 850 l/h
    Nominal flow 300 l/h
    Pressure loss at nominal flow 0.45 bar

    BRITA filter PURITY Clean Extra filtration

    Trusted BRITA System Filter Technology demineralises water step by step:

    1 Pre-filtration 
    A fleece retains coarse particles. Further, its water distribution system ensures optimum use of the downstream filter medium.

    2 Carbonate hardness reduction
    Filter medium reduces carbonate hardness to prevent limescale formation.

    3 Permanent hardness reduction (PURITY Clean Extra only)
    This stage eliminates permanent hardness and non-hardness causing minerals.

    4 Anion reduction (PURITY Clean Extra only)
    This filter medium reduces remaining ions.

    5 Fine filtration
    Finally, a fleece retains remaining fine particles.

    IntelliBypass technology
    The unique IntelliBypass technology allows for a constant by-pass water rate irrespective of the volumetric flow. This ensures consistently high water quality, particularly in case of low water throughput rates.

    2019 Capacity table

  • Purity Extra Clean 1200 ST

    Every PURITY filter system consists of 3 single components : Filter head, Pressure vessel, Exchange cartridge

     

    The ideal solution for the professional washing of high-quality cutlery, superior glasses and fine crockery directly at the bar.

    For raw water with high carbonate hardness and a high level of additional mineral content.
    The PURITY 1200 Clean Extra removes particles and ions that cause limescale, marks and streaks from the water in a targeted way.
    The result is total demineralised water for first-class washing results.

    Total demineralisation

    Sizes: 1200

    Label concept: RED
    The filter composition ensures targeted removal of ions responsible for building limescale, smears and marks. The ideal solution for professional washing of high-quality cutlery, sophisticated glasses and fine dishes for raw water with a high carbonate hardness and high additional mineral content.

    PURITY Clean Extra 1200
    Technology: Total demineralisation
    Capacity with a total hardness of 10°dH (bypass setting 0%) 5,000 l
    Max. operating pressure: 6 bar
    Water intake temperature: 4–60°C
    Flow rate with 1 bar pressure loss: 850 l/h
    Nominal flow 300 l/h
    Pressure loss at nominal flow 0.45 bar

    Operating position horizontal and vertical

     

    BRITA filter PURITY Clean Extra filtration

    Trusted BRITA System Filter Technology demineralises water step by step:

    1 Pre-filtration 
    A fleece retains coarse particles. Further, its water distribution system ensures optimum use of the downstream filter medium.

    2 Carbonate hardness reduction
    Filter medium reduces carbonate hardness to prevent limescale formation.

    3 Permanent hardness reduction (PURITY Clean Extra only)
    This stage eliminates permanent hardness and non-hardness causing minerals.

    4 Anion reduction (PURITY Clean Extra only)
    This filter medium reduces remaining ions.

    5 Fine filtration
    Finally, a fleece retains remaining fine particles.

    IntelliBypass technology
    The unique IntelliBypass technology allows for a constant by-pass water rate irrespective of the volumetric flow. This ensures consistently high water quality, particularly in case of low water throughput rates.

     

    2019 Capacity table

  • Purity Extra Clean 1200 ST Cartridge

    The ideal solution for the professional washing of high-quality cutlery, superior glasses and fine crockery directly at the bar.

    For raw water with high carbonate hardness and a high level of additional mineral content.
    The PURITY 1200 Clean Extra removes particles and ions that cause limescale, marks and streaks from the water in a targeted way.
    The result is total demineralised water for first-class washing results.

    Total demineralisation

    Sizes: 1200

    Label concept: RED
    The filter composition ensures targeted removal of ions responsible for building limescale, smears and marks. The ideal solution for professional washing of high-quality cutlery, sophisticated glasses and fine dishes for raw water with a high carbonate hardness and high additional mineral content.

    PURITY Clean Extra 1200
    Technology: Total demineralisation
    Capacity with a total hardness of 10°dH (bypass setting 0%) 5,000 l
    Max. operating pressure: 6 bar
    Water intake temperature: 4–60°C
    Flow rate with 1 bar pressure loss: 850 l/h
    Nominal flow 300 l/h
    Pressure loss at nominal flow 0.45 bar

    Operating position horizontal and vertical

     

    BRITA filter PURITY Clean Extra filtration

    Trusted BRITA System Filter Technology demineralises water step by step:

    1 Pre-filtration 
    A fleece retains coarse particles. Further, its water distribution system ensures optimum use of the downstream filter medium.

    2 Carbonate hardness reduction
    Filter medium reduces carbonate hardness to prevent limescale formation.

    3 Permanent hardness reduction (PURITY Clean Extra only)
    This stage eliminates permanent hardness and non-hardness causing minerals.

    4 Anion reduction (PURITY Clean Extra only)
    This filter medium reduces remaining ions.

    5 Fine filtration
    Finally, a fleece retains remaining fine particles.

    IntelliBypass technology
    The unique IntelliBypass technology allows for a constant by-pass water rate irrespective of the volumetric flow. This ensures consistently high water quality, particularly in case of low water throughput rates.

     

    2019 Capacity table